|Condition:New other (see details)||Brand:Mc GILL BEARING|
|Warranty:14 days||Manufacturer Part Number:ER-16|
|Country/Region of Manufacture:United States||Other Part Number:WESTERN SKY INDUSTRIES G40-41|
1.0000 INCHES MINIMUM AND 1.0004 INCHES MAXIMUM
OVERALL OUTSIDE DIAMETER
2.0466 INCHES MINIMUM AND 2.0472 INCHES MAXIMUM
OUTER RING WIDTH
0.7500 INCHES NOMINAL
INNER RING WIDTH
1.3700 INCHES MINIMUM AND 1.3750 INCHES MAXIMUM
BEARING SEAL TYPE
INTERNAL FIT-UP DESIGNATION
SNAP RING-GROOVE MOUNTING AND MOUNTING GROOVE
W/FELT ENCLOSED SEALS
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION
DOD-G-24508 MIL SPEC SINGLE MATERIAL RESPONSE
SINGLE ROW BALL, NOT SELF-ALIGNING, INNER RING EXTENDS BOTH SIDES, WITH SETSCREW IN INNER RING, GREASE GROOVE AND SNAP RING ON OUTER RING
Industrial Bearings Solutions has been supplying quality precision components to the best of UK and European manufacturing.
With highly qualified staff located throughout the SG, USA. John continue to act as exclusive representatives to a number of leading International component manufacturers from Europe, USA and Japan, all approved to the latest ISO9001 and AS9120 quality standards. Industrial Bearings Solutions offer a high level of technical & commercial service about McGILL BEARING,BALL,ANNULAR ER-16 NSN 3110-00-114-9491 G40-41 Dishwasher to customers in this Cam and roller follwers market, and with the support of our dedicated sales partners, also across Europe.
Whether you require Precision Bearings,McGILL BEARING,BALL,ANNULAR ER-16 NSN 3110-00-114-9491 G40-41 Dishwasher,Gears or Drives, we have the products McGILL BEARING,BALL,ANNULAR ER-16 NSN 3110-00-114-9491 G40-41 Dishwasher, together with a high level of technical support, to help you turn your ideas into engineering solutions. Contact us today to discuss your requirements.
A Cam and roller follwers, also known as a track follower, is a specialized type of roller or needle bearing designed to follow cam lobe profiles. Cam and roller follwers come in a vast array of different configurations, however the most defining characteristic is how the Cam and roller follwers mounts to its mating part; stud style cam followers use a stud while the yoke style has a hole through the middle.
All Cam and roller follwers can be track followers McGILL BEARING,BALL,ANNULAR ER-16 NSN 3110-00-114-9491 G40-41 Dishwasher, but not all track followers are cam followers. Some track followers have specially shaped outer diameters (OD) to follow tracks. For example, track followers are available with a V-groove for following a V-track, or the OD can have a flange to follow the lip of the track.
Specialized track followers are also designed to withstand thrust loads so the anti-friction elements are usually bearing balls or of a tapered roller bearing construction.
Copyright © 2017 - 2019Industrial Bearings Solutions All Rights Reserved