Rexroth AZPF are available as standard gear pumps Rexroth AZPF-12-005RRR12MB in the 4 series of B, F, N and G and as SILENCE gear pumps Rexroth AZPF-12-005RRR12MB in the series of S, T and U, in which the displacements are graded by different gear widths. Further configuration variants are given by different flanges, shafts, valve arrangements and multiple pump combinations.
The external gear pump consists essentially of a pair of gears supported in Rexroth AZPF bushings and the case with a front and a rear cover. The drive shaft protrudes from the front cover where it is sealed by the shaft seal ring. The Rexroth AZPF-12-005RRR12MB forces are absorbed by special Rexroth AZPF-12-005RRR12MB bushings with sufficient elasticity to produce surface contact instead of line contact. They also ensure excellent resistance to galling – especially at low speed. The gears have 12 teeth. This keeps both flow pulsation and noise emission to a minimum.
Needless to say, Industrial Bearings Solutions aims for the most appropriate designs and enhanced Rexroth AZPF quality. The company supplies many types of Rexroth AZPF that offer long operating life, high load capacity and high reliability. The goal is low energy consumption for an environmentally friendly approach and low maintenance costs with Rexroth AZPF-12-005RRR12MB.
Always Rexroth AZPF-12-005RRR12MB in mind environmental issues, Industrial Bearings Solutions will continue to concentrate its comprehensive strengths on the development for future generations of Rexroth AZPF and compressor bearings that consume even less energy and that have longer working lives.
Copyright © 2017 - 2019Industrial Bearings Solutions All Rights Reserved