|Condition:New||Manufacturer Part Number:1gfe 2jz-ge toyota twin turbo|
|Warranty:Yes||Interchange Part Number:555cc 650cc 750cc 850cc 1000cc 1200cc|
|Brand:bosch siemens deka denso sard id1000 sard tomei||Other Part Number:TH550A sc300 oil pump intake manifold exhaust|
|Country of Manufacture:United States|
6pcs Toyota/Supra/Lexus 750cc Bosch Fuel Injectors
Looking for bigger injectors for your high powered Toyota or lexus? Look no further. Up for grabs is a set of 6pcs Bosch 750cc Fuel Injectors. Injectors are plug and play fit with included plug and play adapters. No cutting or soldering wires necessary. The injectors are dynamic and static flow tested and packed in balanced sets within 2 percent. Injectors will come with injector latency data for easy tuning. Injectors will support 700hp. Please view vehicle compatibility list below. Injectors are e85/alcohol compatible. Will run with all known race fuels on the market today.
The injectors are all balanced for exact cylinder to cylinder horsepower equilibrium. At the engines stock fuel pressure of (43.5psi) the injectors can support engines making up to 700hp (@ 80% duty). At 4bar fuel pressure the injectors can support engines making up to 800hp. The injectors utilize a single mist spray pattern which will provide proper fuel atomization resulting in smoother idle, and clean combustion characteristics. With the combination of a balanced set and great fuel atomization, you will achieve light and partial throttle drivability, lower emissions, easier tuning, and more power output to the wheels.
Injectors are backed by our 2 year unlimited mile warranty!!
Static Flow Rate @ 43.5PSI (300 KPa) 750cc/min
Coil Resistance: 12 Ohms / High Impedance / Saturated
Factory Tollerance: +/-5% (actual +/-7%)
Cone Spray Angle - single spray cone. Approximate cone angle for 90% of spray volume
10.5-11mm Inlet Diameter
Factory fitted with Viton upper and lower o-rings.
IF YOU HAVE ANY QUESTIONS OR CONCERNS, FEEL FREE TO EMAIL ME AT cleaninjection(at)msn.com
Copyright © 2017 - 2018Industrial Bearings Solutions All Rights Reserved