Home >  Maintenance Products Air Driven Oil Injector >  Ford 6.0L Powerstroke Oil Rail Leak Repair Kit,Tool,O-rings,+ Injector Seal Kits
Ford 6.0L Powerstroke Oil Rail Leak Repair Kit,Tool,O-rings,+ Injector Seal Kits Ford 6.0L Powerstroke Oil Rail Leak Repair Kit,Tool,O-rings,+ Injector Seal Kits

Ford 6.0L Powerstroke Oil Rail Leak Repair Kit,Tool,O-rings,+ Injector Seal Kits

Kit includes: Tool for removing Injector Feed Port8- O-Rings ( Alliant brand ) TO RESEAL THE HIGH PRESSURE OIL RAIL 8- Injector Seal kits (Alliant brand ) TO RESEAL THE...
  • Check Stock | Get Latest Price
  • Original Packing
  • Within 3-5 Working Days After Receive Your Bank Receipt
  • L/C,D/A,D/P,T/T,Western Union,MoneyGram
  • Enough Stock
  • Original
  • Original
  • C/O,C/Q,Follow Your Demand
Product Groups
see more

Dani

Mobile : +852 31691718

Tel : +852(3)1591338

Request a quote

Address:05 Stanley Street Central Hongkong

Product Details

Condition:New Brand:SPS/ and Alliant
Country of Manufacture:United States Warranty:Yes
Manufacturer Part Number:ap0002/hex tool/0070

Product Description

Kit includes:

    Tool for removing Injector Feed Port8- O-Rings ( Alliant brand ) TO RESEAL THE HIGH PRESSURE OIL RAIL 8- Injector Seal kits (Alliant brand ) TO RESEAL THE INJECTORS, INCLUDES HIGH PRESSURE SEALS ON TOP OF INJInstructions with Torque Specs for the Oil Rail Repair Tool

    Ford 6.0L Power Stroke 03-07

    BUYERS BEWARE !! THIS IS NOT THE PLACE TO USE CHEAP ORINGS !! OUR O RINGS COME FROM ALLIANT POWER CORP AND MADE SPECIFICALLY TO REMEDY THIS COMMON PROBLEM OF ORING FAILURE.


ANY QUESTIONS ,PLEASE CALL ANGELO 386-804-5031

If you are experiencing repeat failure of the high pressure oil inlet o-ring on 6.0L injectors? The often-overlooked cause of this problem is the ball tube o-ring in the high pressure oil rail. If close examination of the failed injector seal indicates that it was eroded from the top to the bottom, then the root cause is in the high pressure oil rail. Until recently, this rail was not a serviceable part and required replacement as an assembly at great expense. We now have the parts and tools available to correctly perform this repair and prevent costly comebacks.

Any time the valve covers are removed from a 6.0L engine you should check the oil rails for leaks. This can be done by removing the ICP sensor and pressurizing the system with shop air. You will need to command the IPR valve closed with a scan tool in order to build pressure in the system. Frequently you will find leaks between the ball tube and the oil rail. If there is a leak at one ball tube it is probably wise to replace them all. Even if you do not find any leaks during air testing, it is wise to closely inspect the nipple portion of the ball tube where it inserts into the fuel injector. Even the slightest surface imperfections here are not acceptable. Since pressure in the high pressure oil system can exceed 3,500 PSI even slight surface abnormalities can result in problems over time.

Note that if your injector high pressure oil inlet seals have failed you do NOT have to replace the injectors. . Our replacement ball tube orings are made from a higher temperature Viton material to prevent repeat failure.

 

6.0L Oil Rail 

NEW ARRIVALS

Industrial Bearings Solutions
Mobile : +852 31691718
Website : www.tvrundown.com
Telephone : +852(3)1591338
Mail : info@tvrundown.com
Address : 05 Stanley Street Central Hongkong

Copyright © 2017 - 2018Industrial Bearings Solutions All Rights Reserved